Source SS 317 Wire / Mesh from India
India Supply Solutions sources SS 317 Wire / Mesh from qualified Indian manufacturers against the buyer's exact grade, standard, dimensions, quantity and inspection plan. We are the procurement partner — not the mill or manufacturer. Ready-stock sourcing is checked through our Indian stockist and manufacturer network; exact make, heat / MTC, dimensions, quantity and dispatch status are confirmed per RFQ.
Grade + form + specificationSource SS 317 Wire / Mesh to specification
Build a supplier-comparable enquiry by defining wire diameter, mesh count / aperture, weave, finish, coil / sheet size and mechanical requirement, material designation, governing standard and edition, quantity, destination, acceptance criteria and required certification.
RFQ definition: wire diameter, mesh count / aperture, weave, finish, coil / sheet size and mechanical requirement.
Typical family applications: process equipment, food and beverage, chemical service, heat-resistant service, fabrication and general corrosion-resistant engineering. Suitability remains the buyer's engineering decision.
SS 317 Wire / Mesh sizes and dimensions to specify
Useful enquiry selectors—not an inventory or universal availability claim. Exact manufacturability is confirmed against grade, standard, route, tolerance and quantity.
Wire and mesh are defined by wire diameter, aperture or mesh count, weave, material condition and supplied form.
Range guide: There is no responsible single universal size range; every RFQ should state the dimensional combination and use case.
| Dimensional basis | Do not state mesh count without wire diameter or aperture |
|---|---|
| Supply form | Coil / spool / roll / panel / cut sheet |
| Performance | Tensile, filtration, opening tolerance or load requirement as applicable |
Common SS 317 Wire / Mesh size and RFQ examples
Use these as enquiry-format references only. They are not a stock list, dimensional standard substitute or availability promise.
| Wire / mesh example | Wire diameter | Opening / count | Supply size | Example RFQ line |
|---|---|---|---|---|
| Woven mesh | 0.50 mm | 1.0 mm aperture | 1 m × 30 m roll | SS 317 Wire / Mesh — Woven mesh / 0.50 mm / 1.0 mm aperture / 1 m × 30 m roll |
| Woven mesh | 0.25 mm | 40 mesh example | 1 m × 30 m roll | SS 317 Wire / Mesh — Woven mesh / 0.25 mm / 40 mesh example / 1 m × 30 m roll |
| Welded mesh | 2.0 mm | 25 × 25 mm opening | sheet / roll | SS 317 Wire / Mesh — Welded mesh / 2.0 mm / 25 × 25 mm opening / sheet / roll |
| Welded mesh | 3.0 mm | 50 × 50 mm opening | sheet / roll | SS 317 Wire / Mesh — Welded mesh / 3.0 mm / 50 × 50 mm opening / sheet / roll |
| Wire | 1.0 mm diameter | condition specified | coil / spool | SS 317 Wire / Mesh — Wire / 1.0 mm diameter / condition specified / coil / spool |
| Wire | 3.0 mm diameter | condition specified | coil / straight | SS 317 Wire / Mesh — Wire / 3.0 mm diameter / condition specified / coil / straight |
How we compare SS 317 Wire / Mesh manufacturers
Grade designation, heat traceability and required certification are matched to the RFQ.
Route, size range, tolerances, heat treatment and form-specific capability are checked.
Dimensional, visual, PMI / chemistry, mechanical or NDT controls are defined where applicable.
MTC, inspection records, packing and export documents are aligned before dispatch.
No material grade, route, standard or dimension substitution without written buyer approval.
Supplier offers are compared on the same technical basis before commercial selection.
SS 317 Wire / Mesh sourcing questions
How do I source SS 317 Wire / Mesh from India?
Send the exact material designation, product standard, wire diameter, mesh count / aperture, weave, finish, coil / sheet size and mechanical requirement, quantity, destination and required inspection. India Supply Solutions then identifies and compares suitable Indian manufacturers or suppliers.
How do I compare the qualified SS 317 Wire / Mesh manufacturers in India?
Compare actual capability for the named grade and form, applicable standard, traceability, test documentation, delivery record, inspection readiness and commercial transparency—not only the lowest quoted price.
Can you quote SS 317 Wire / Mesh price in India?
Yes, after grade, standard, dimensions, quantity, packing and delivery basis are defined. We do not publish a fabricated fixed price for specification-sensitive metal products.
What documents should be requested for SS 317 Wire / Mesh?
Depending on the requirement, buyers may request MTC / heat traceability, inspection records, PMI or chemistry verification, mechanical tests, NDT and packing / export documents.