CNC Soft Jaws & Turret Sleeves Supplier India
ISS supplies and coordinates procurement of clamping components from India. Product configuration, quantity, inspection, packing and delivery terms are confirmed in the quotation.
For soft jaws, provide chuck make and model, jaw interface, serration details where applicable, fastener layout and required jaw dimensions. For turret sleeves, distinguish straight bore from Morse-taper arrangements and open-slot from closed-slot designs. Include the turret interface drawing and inspection dimensions. Compatibility must be confirmed for the exact machine rather than inferred from a generic CNC designation.
All workholding families · Send drawing and RFQ
Catalogue dimensions and model selection
Dimensions below follow the named supplier catalogue drawing, in millimetres unless a thread, taper or other unit is stated. Letter labels belong to that drawing. Order by complete item code and an approved current drawing; dimensions are not a stock or delivery promise.
CNC soft jaw sets
| code | A | B | C | D | E | F | d thread | serrations |
|---|---|---|---|---|---|---|---|---|
| aec1601.001 | 48 | 25 | 20 | 8 | 8 | 15 | M6 | 1.5x60 degrees |
| aec1601.002 | 57 | 26 | 26 | 10 | 14 | 14 | M8 | 1.5x60 degrees |
| aec1601.003 | 80 | 38 | 35 | 17 | 17 | 19 | M12 | 1/16x90 degrees |
| aec1601.004 | 120 | 48 | 45 | 21 | 25 | 25 | M16 | 1/16x90 degrees |
| aec1601.005 | 155 | 65 | 60 | 25.5 | 40 | 40 | M20 | 3/32x90 degrees |
| aec1601.006 | 180 | 70 | 64 | 25 | 40 | 40 | M20 | 3.0x60 degrees |
CNC T-nuts
| code | d thread | A | B | C | H | K | E | F |
|---|---|---|---|---|---|---|---|---|
| aec1602.001 | M8 | 10 | 14 | 26 | 12 | 8 | 6 | 14 |
| aec1602.002 | M10 | 12 | 17 | 42 | 22 | 15 | 11.5 | 19 |
| aec1602.003 | M12 | 17 | 24 | 42 | 21 | 14 | 11.5 | 19 |
| aec1602.004 | M16 | 21 | 29.5 | 48 | 24.5 | 14.5 | 11.5 | 25 |
Straight-bore turret sleeves
| code pattern | D g6 | d H7 options | L |
|---|---|---|---|
| aec1603.0-d | 20 | 8,10,12 | 50 |
| aec1603.1-d | 25 | 8,10,12,16 | 60 |
| aec1603.2-d | 32 | 8,10,12,16,20,25 | 70 |
| aec1603.3-d | 40 | 8,10,12,16,20,25,32 | 85 |
| aec1603.4-d | 50 | 10,12,16,20,25,32 | 95 |
Open-slot Morse-taper turret sleeves
| code pattern | D g6 | taper x length options |
|---|---|---|
| aec1604.1MT | 20 | MT1x70,MT2x90 |
| aec1604.2MT | 25 | MT1x70,MT2x80 |
| aec1604.3MT | 32 | MT1x70,MT2x80,MT3x100 |
| aec1604.4MT | 40 | MT1x70,MT2x80,MT3x100,MT4x125 |
| aec1604.5MT | 50 | MT1x70,MT2x80,MT3x100 |
Closed-slot Morse-taper turret sleeves
| code pattern | D g6 | taper x length options |
|---|---|---|
| aec1605.1MT | 19.05 | MT1x76,MT2x90 |
| aec1605.2MT | 25.4 | MT1x90,MT2x95,MT3x115 |
| aec1605.3MT | 38.1 | MT1x90,MT2x95,MT3x115,MT4x135 |
| aec1605.4MT | 44.45 | MT1x90,MT2x95,MT3x115,MT4x135 |
| aec1605.5MT | 50.8 | MT1x90,MT2x95,MT3x115,MT4x135 |
| aec1605.6MT | 54 | MT2x95,MT3x115,MT4x135,MT5x175 |
Specify a supplier-comparable order
Send the catalogue code or drawing revision, quantity per model, material and surface treatment, machine interface and destination. Identify critical dimensions, thread pitch and mating components. Confirm sample approval, inspection records, packing, MOQ and lead time in the offer.
Price, source and export terms
ISS supplies the agreed requirement through qualified sources. Compare factory or stockist offers on the same specification and quantity, with ISS service charges, inspection, packaging and logistics identified. Best or lowest-cost supplier selection depends on verified suitability and the full delivered offer; ISS does not claim to manufacture these products or hold a largest-supplier ranking.
Engineering confirmation
Load, force, torque and machine compatibility require confirmation for the complete setup. Historical IS or DIN labels in a catalogue are not evidence of current certification. No lifting rating is inferred for fixture eye bolts. Drawing details and any catalogue ambiguity must be resolved before order acceptance.
For sleeve code patterns, select the actual bore or taper and length. Confirm serration pitch units and angle, chuck model and jaw interface before ordering; a generic CNC machine description is insufficient.
Source: Industrial Tools & Hardware supplier catalogue. Catalogue dimensions may change; current source confirmation governs the quotation.
Request a quotation