Injection Mould Clamping Components Supplier India
ISS supplies and coordinates procurement of clamping components from India. Product configuration, quantity, inspection, packing and delivery terms are confirmed in the quotation.
Provide the platen thread specification and usable depth, mould clamping height, clamp seating detail and available installation space. Mould strap clamps, flanged studs, support bolts and thick washers should be selected together against the machine and tooling requirements. Include an approved installation or torque specification where available; do not derive tightening values from a product photograph.
All workholding families · Send drawing and RFQ
Catalogue dimensions and model selection
Dimensions below follow the named supplier catalogue drawing, in millimetres unless a thread, taper or other unit is stated. Letter labels belong to that drawing. Order by complete item code and an approved current drawing; dimensions are not a stock or delivery promise.
Mould strap clamps with tapped support hole
| code | D | L | W | E | A | B | E1 | d |
|---|---|---|---|---|---|---|---|---|
| aec1701.121 | 14 | 125 | 40 | 20 | 21 | 70 | 12 | 12 |
| aec1701.161 | 18 | 160 | 50 | 25 | 26 | 85 | 16 | 16 |
| aec1701.201 | 22 | 200 | 60 | 30 | 30 | 95 | 20 | 20 |
| aec1701.240 | 26 | 200 | 70 | 30 | 35 | 95 | 24 | 24 |
| aec1701.241 | 26 | 250 | 70 | 35 | 35 | 125 | 24 | 24 |
Flanged studs
| code | D | L | L1 | L2 |
|---|---|---|---|---|
| aec1702.120 | 12 | 80 | 30 | 60 |
| aec1702.121 | 12 | 110 | 30 | 80 |
| aec1702.160 | 16 | 100 | 35 | 65 |
| aec1702.161 | 16 | 140 | 35 | 90 |
| aec1702.162 | 16 | 160 | 35 | 110 |
| aec1702.200 | 20 | 130 | 40 | 75 |
| aec1702.201 | 20 | 175 | 40 | 90 |
| aec1702.202 | 20 | 225 | 40 | 110 |
| aec1702.240 | 24 | 150 | 40 | 90 |
| aec1702.241 | 24 | 200 | 40 | 110 |
| aec1702.242 | 24 | 250 | 40 | 125 |
Support bolts
| code | d | D | L | AF |
|---|---|---|---|---|
| aec1703.120 | 12 | 35 | 65 | 19 |
| aec1703.121 | 12 | 35 | 100 | 19 |
| aec1703.160 | 16 | 35 | 75 | 19 |
| aec1703.161 | 16 | 35 | 110 | 19 |
| aec1703.200 | 20 | 48 | 85 | 27 |
| aec1703.201 | 20 | 48 | 110 | 27 |
| aec1703.240 | 24 | 48 | 95 | 27 |
| aec1703.241 | 24 | 48 | 130 | 27 |
Thick plain washers
| code | D | D1 | S |
|---|---|---|---|
| aec1704.120 | 12.5 | 40 | 10 |
| aec1704.160 | 16.5 | 40 | 10 |
| aec1704.200 | 20.5 | 40 | 10 |
| aec1704.240 | 24.5 | 40 | 10 |
Specify a supplier-comparable order
Send the catalogue code or drawing revision, quantity per model, material and surface treatment, machine interface and destination. Identify critical dimensions, thread pitch and mating components. Confirm sample approval, inspection records, packing, MOQ and lead time in the offer.
Price, source and export terms
ISS supplies the agreed requirement through qualified sources. Compare factory or stockist offers on the same specification and quantity, with ISS service charges, inspection, packaging and logistics identified. Best or lowest-cost supplier selection depends on verified suitability and the full delivered offer; ISS does not claim to manufacture these products or hold a largest-supplier ranking.
Engineering confirmation
Load, force, torque and machine compatibility require confirmation for the complete setup. Historical IS or DIN labels in a catalogue are not evidence of current certification. No lifting rating is inferred for fixture eye bolts. Drawing details and any catalogue ambiguity must be resolved before order acceptance.
Source: Industrial Tools & Hardware supplier catalogue. Catalogue dimensions may change; current source confirmation governs the quotation.
Request a quotation