Side Clamps for Machining Supplier India
ISS supplies and coordinates procurement of clamping components from India. Product configuration, quantity, inspection, packing and delivery terms are confirmed in the quotation.
For machine, swing, taper and low-profile clamps, specify workpiece thickness, available side clearance, table or fixture interface and anticipated machining operation. Discuss lifting restraint and permissible contact marks before selecting a jaw arrangement. Thin plates require a workholding review for deformation; dimensional examples should not be treated as guaranteed machining accuracy.
All workholding families · Send drawing and RFQ
Catalogue dimensions and model selection
Dimensions below follow the named supplier catalogue drawing, in millimetres unless a thread, taper or other unit is stated. Letter labels belong to that drawing. Order by complete item code and an approved current drawing; dimensions are not a stock or delivery promise.
Machine clamps
| code | model | L | B | H | B1 | H1 | T |
|---|---|---|---|---|---|---|---|
| aec1401.001 | MC-1 | 137 | 60 | 55 | 11 | 19 | 18 |
| aec1401.002 | MC-2 | 191 | 80 | 80 | 15 | 30 | 26 |
| aec1401.003 | MC-3 | 260 | 122 | 135 | 20 | 49 | 33 |
Swing machine clamp
| code | model | L | B | H | travel |
|---|---|---|---|---|---|
| aec1401.011 | KMC-4 | 102 | 62 | 58 | 4 |
Taper clamps
| code | model | T slot | L | B | H |
|---|---|---|---|---|---|
| aec1406.101 | TC-1 | 12 | 85 | 24 | 12 |
| aec1406.102 | TC-2 | 14 | 100 | 29 | 15 |
| aec1406.103 | TC-3 | 18 | 115 | 39 | 19 |
| aec1406.104 | TC-4 | 22 | 135 | 49 | 24 |
Flat-clamp body dimensions
| model | L | B | H | T slot as printed | horizontal jaw travel |
|---|---|---|---|---|---|
| FC-1 | 83 | 24 | 12 | 10(8) | 2 |
| FC-2 | 113 | 30 | 15 | 14(12) | 2 |
| FC-3 | 134 | 39 | 19 | 18(16) | 3 |
| FC-4 | 195 | 49 | 24 | 22(20) | 4 |
Flat-clamp ordering variants
| code | model | T nut size as printed |
|---|---|---|
| aec1402.108 | FC-1/8 | 8M6 |
| aec1402.110 | FC-1/10 | 10M8 |
| aec1402.212 | FC-2/12 | 12M10 |
| aec1402.214 | FC-2/14 | 14M12 |
| aec1402.316 | FC-3/16 | 16M12 |
| aec1402.318 | FC-3/18 | 18M16 |
| aec1402.420 | FC-4/20 | 20M16 |
| aec1402.422 | FC-4/22 | 22M20 |
Mini-flat clamps
| code | model | L | B | H | T slot W |
|---|---|---|---|---|---|
| aec1403.012 | MFC-1 | 38 | 18 | 24 | 12 |
| aec1403.014 | MFC-2 | 42 | 22 | 27 | 14 |
| aec1403.016 | MFC-3 | 46 | 25 | 31 | 16 |
| aec1403.018 | MFC-4 | 49 | 28 | 35 | 18 |
| aec1403.020 | MFC-5 | 53 | 32 | 39 | 20 |
Mini swing flat clamps
| code | model | T slot | L | B | H |
|---|---|---|---|---|---|
| aec1404.012 | MSFC-12 | 12 | 54 | 18 | 29 |
| aec1404.014 | MSFC-14 | 14 | 54 | 22 | 31 |
| aec1404.016 | MSFC-16 | 16 | 65 | 25 | 37 |
| aec1404.018 | MSFC-18 | 18 | 65 | 28 | 40 |
| aec1404.020 | MSFC-20 | 20 | 65 | 32 | 43 |
| aec1404.022 | MSFC-22 | 22 | 108 | 35 | 59 |
| aec1404.024 | MSFC-24 | 24 | 108 | 40 | 62 |
| aec1404.028 | MSFC-28 | 28 | 108 | 44 | 66 |
CNC clamps
| code | model | L | L1 | B | H | H1 | K |
|---|---|---|---|---|---|---|---|
| aec1405.012 | CNC-12L | 80 | 65 | 30 | 42 | 30 | 20 |
| aec1405.112 | CNC-12M | 80 | 65 | 30 | 42 | 42 | 20 |
| aec1405.018 | CNC-18L | 92.5 | 80 | 40 | 49 | 37 | 25 |
| aec1405.118 | CNC-18M | 92.5 | 80 | 40 | 49 | 49 | 25 |
Specify a supplier-comparable order
Send the catalogue code or drawing revision, quantity per model, material and surface treatment, machine interface and destination. Identify critical dimensions, thread pitch and mating components. Confirm sample approval, inspection records, packing, MOQ and lead time in the offer.
Price, source and export terms
ISS supplies the agreed requirement through qualified sources. Compare factory or stockist offers on the same specification and quantity, with ISS service charges, inspection, packaging and logistics identified. Best or lowest-cost supplier selection depends on verified suitability and the full delivered offer; ISS does not claim to manufacture these products or hold a largest-supplier ranking.
Engineering confirmation
Load, force, torque and machine compatibility require confirmation for the complete setup. Historical IS or DIN labels in a catalogue are not evidence of current certification. No lifting rating is inferred for fixture eye bolts. Drawing details and any catalogue ambiguity must be resolved before order acceptance.
Source: Industrial Tools & Hardware supplier catalogue. Catalogue dimensions may change; current source confirmation governs the quotation.
Request a quotation