Strap & Hold-Down Clamps Supplier India
ISS supplies and coordinates procurement of clamping components from India. Product configuration, quantity, inspection, packing and delivery terms are confirmed in the quotation.
Compare strap, stepped, heel, U and hold-down designs using the complete setup: stud position, available clamping height, rear support and tool clearance. Quote the catalogue model or a dimensioned drawing with clamp length, width, thickness and slot dimensions. Do not select a larger thread as a substitute for an engineering check of the complete assembly.
All workholding families · Send drawing and RFQ
Catalogue dimensions and model selection
Dimensions below follow the named supplier catalogue drawing, in millimetres unless a thread, taper or other unit is stated. Letter labels belong to that drawing. Order by complete item code and an approved current drawing; dimensions are not a stock or delivery promise.
Strap clamp
| code | D | L | W | E | A | B |
|---|---|---|---|---|---|---|
| aec1201.080 | 9 | 60 | 25 | 12 | 13 | 22 |
| aec1201.100 | 11 | 80 | 30 | 15 | 15 | 30 |
| aec1201.120 | 14 | 100 | 40 | 20 | 21 | 40 |
| aec1201.121 | 14 | 125 | 40 | 20 | 21 | 50 |
| aec1201.160 | 18 | 125 | 50 | 25 | 26 | 45 |
| aec1201.161 | 18 | 160 | 50 | 25 | 26 | 65 |
| aec1201.200 | 22 | 160 | 60 | 30 | 30 | 60 |
| aec1201.201 | 22 | 200 | 60 | 30 | 30 | 80 |
| aec1201.240 | 26 | 200 | 70 | 30 | 35 | 80 |
| aec1201.241 | 26 | 250 | 70 | 35 | 35 | 105 |
| aec1201.300 | 34 | 250 | 80 | 40 | 45 | 100 |
| aec1201.301 | 34 | 315 | 80 | 50 | 45 | 130 |
Step strap clamp
| code | D | L | W | E | A | B |
|---|---|---|---|---|---|---|
| aec1202.080 | 9 | 60 | 25 | 12 | 13 | 22 |
| aec1202.100 | 11 | 80 | 30 | 15 | 15 | 30 |
| aec1202.120 | 14 | 100 | 40 | 20 | 21 | 40 |
| aec1202.160 | 18 | 125 | 50 | 25 | 26 | 45 |
| aec1202.200 | 22 | 160 | 60 | 30 | 30 | 60 |
| aec1202.240 | 26 | 200 | 70 | 30 | 35 | 80 |
Heel strap clamp
| code | D | L | W | E | H | L1 | A | B |
|---|---|---|---|---|---|---|---|---|
| aec1203.080 | 9 | 80 | 25 | 12 | 25 | 9 | 25 | 25 |
| aec1203.100 | 11 | 100 | 30 | 15 | 30 | 12 | 32 | 32 |
| aec1203.120 | 14 | 125 | 40 | 20 | 40 | 16 | 40 | 40 |
| aec1203.160 | 18 | 160 | 50 | 25 | 50 | 20 | 49 | 49 |
| aec1203.200 | 22 | 200 | 60 | 30 | 60 | 24 | 55 | 55 |
| aec1203.240 | 26 | 250 | 70 | 40 | 70 | 28 | 72 | 72 |
U-clamp
| code | D | L | W | E |
|---|---|---|---|---|
| aec1204.080 | 9 | 80 | 25 | 15 |
| aec1204.100 | 11 | 100 | 31 | 20 |
| aec1204.120 | 14 | 125 | 38 | 25 |
| aec1204.121 | 14 | 160 | 38 | 25 |
| aec1204.122 | 14 | 200 | 38 | 25 |
| aec1204.160 | 18 | 160 | 48 | 30 |
| aec1204.161 | 18 | 200 | 48 | 30 |
| aec1204.162 | 18 | 250 | 48 | 30 |
| aec1204.200 | 22 | 200 | 62 | 40 |
| aec1204.201 | 22 | 250 | 62 | 40 |
| aec1204.202 | 22 | 315 | 62 | 40 |
| aec1204.240 | 26 | 200 | 66 | 40 |
| aec1204.241 | 26 | 250 | 66 | 40 |
| aec1204.242 | 26 | 315 | 66 | 40 |
| aec1204.300 | 34 | 250 | 74 | 50 |
| aec1204.301 | 34 | 315 | 74 | 50 |
| aec1204.302 | 34 | 400 | 74 | 50 |
Hold down clamp
| code | L | B | D thread | range mm |
|---|---|---|---|---|
| aec1205.100 | 95 | 30 | M10 | 0-30 |
| aec1205.120 | 168 | 50 | M12 | 0-60 |
| aec1205.160 | 180 | 50 | M16 | 0-80 |
| aec1205.200 | 230 | 55 | M20 | 0-110 |
| aec1205.240 | 273 | 80 | M24 | 0-140 |
Specify a supplier-comparable order
Send the catalogue code or drawing revision, quantity per model, material and surface treatment, machine interface and destination. Identify critical dimensions, thread pitch and mating components. Confirm sample approval, inspection records, packing, MOQ and lead time in the offer.
Price, source and export terms
ISS supplies the agreed requirement through qualified sources. Compare factory or stockist offers on the same specification and quantity, with ISS service charges, inspection, packaging and logistics identified. Best or lowest-cost supplier selection depends on verified suitability and the full delivered offer; ISS does not claim to manufacture these products or hold a largest-supplier ranking.
Engineering confirmation
Load, force, torque and machine compatibility require confirmation for the complete setup. Historical IS or DIN labels in a catalogue are not evidence of current certification. No lifting rating is inferred for fixture eye bolts. Drawing details and any catalogue ambiguity must be resolved before order acceptance.
Source: Industrial Tools & Hardware supplier catalogue. Catalogue dimensions may change; current source confirmation governs the quotation.
Request a quotation