Source Nitronic 60 / Alloy 218 Coil / Strip from India
India Supply Solutions sources Nitronic 60 / Alloy 218 Coil / Strip from qualified Indian manufacturers against the buyer's exact grade, standard, dimensions, quantity and inspection plan. We are the procurement partner — not the mill or manufacturer. Ready-stock sourcing is checked through our Indian stockist and manufacturer network; exact make, heat / MTC, dimensions, quantity and dispatch status are confirmed per RFQ.
Grade + form + specificationSource Nitronic 60 / Alloy 218 Coil / Strip to specification
Build a supplier-comparable enquiry by defining thickness, width, coil ID / OD, finish, edge condition, temper and packing, material designation, governing standard and edition, quantity, destination, acceptance criteria and required certification.
RFQ definition: thickness, width, coil ID / OD, finish, edge condition, temper and packing.
Typical family applications: process equipment, food and beverage, chemical service, heat-resistant service, fabrication and general corrosion-resistant engineering. Suitability remains the buyer's engineering decision.
Nitronic 60 / Alloy 218 Coil / Strip sizes and dimensions to specify
Useful enquiry selectors—not an inventory or universal availability claim. Exact manufacturability is confirmed against grade, standard, route, tolerance and quantity.
Coil and strip must be specified by product standard, thickness, width, temper or condition, edge and surface.
Range guide: Common enquiry guide: about 0.05 to 6 mm thick and 5 to 2000 mm wide, subject to alloy, process and mill capability.
| Coil geometry | Coil ID, maximum OD and maximum coil weight |
|---|---|
| Edge | Mill edge / slit edge / deburred or special edge |
| Finish and temper | Specify finish, hardness / temper, flatness and surface protection |
Common Nitronic 60 / Alloy 218 Coil / Strip size and RFQ examples
Use these as enquiry-format references only. They are not a stock list, dimensional standard substitute or availability promise.
| Form | Exact size example | Finish / edge | Quantity basis | Example RFQ line |
|---|---|---|---|---|
| Sheet | 1.0 × 1000 × 2000 mm | 2B / BA / buyer finish | sheets / kg | Nitronic 60 / Alloy 218 Coil / Strip — Sheet / 1.0 × 1000 × 2000 mm / 2B / BA / buyer finish / sheets / kg |
| Sheet | 2.0 × 1250 × 2500 mm | 2B / No. 4 / film | sheets / kg | Nitronic 60 / Alloy 218 Coil / Strip — Sheet / 2.0 × 1250 × 2500 mm / 2B / No. 4 / film / sheets / kg |
| Plate | 6 × 1500 × 3000 mm | hot rolled / pickled | plates / kg | Nitronic 60 / Alloy 218 Coil / Strip — Plate / 6 × 1500 × 3000 mm / hot rolled / pickled / plates / kg |
| Plate | 10 × 2000 × 6000 mm | solution treated / pickled | plates / kg | Nitronic 60 / Alloy 218 Coil / Strip — Plate / 10 × 2000 × 6000 mm / solution treated / pickled / plates / kg |
| Plate | 25 × 2000 × 6000 mm | buyer-specified surface | plates / kg | Nitronic 60 / Alloy 218 Coil / Strip — Plate / 25 × 2000 × 6000 mm / buyer-specified surface / plates / kg |
| Coil | 1.0 × 1250 mm width | 2B / edge condition | coil weight | Nitronic 60 / Alloy 218 Coil / Strip — Coil / 1.0 × 1250 mm width / 2B / edge condition / coil weight |
| Strip | 0.5 × 100 mm width | slit edge / temper | coil weight | Nitronic 60 / Alloy 218 Coil / Strip — Strip / 0.5 × 100 mm width / slit edge / temper / coil weight |
How we compare Nitronic 60 / Alloy 218 Coil / Strip manufacturers
Grade designation, heat traceability and required certification are matched to the RFQ.
Route, size range, tolerances, heat treatment and form-specific capability are checked.
Dimensional, visual, PMI / chemistry, mechanical or NDT controls are defined where applicable.
MTC, inspection records, packing and export documents are aligned before dispatch.
No material grade, route, standard or dimension substitution without written buyer approval.
Supplier offers are compared on the same technical basis before commercial selection.
Nitronic 60 / Alloy 218 Coil / Strip sourcing questions
How do I source Nitronic 60 / Alloy 218 Coil / Strip from India?
Send the exact material designation, product standard, thickness, width, coil ID / OD, finish, edge condition, temper and packing, quantity, destination and required inspection. India Supply Solutions then identifies and compares suitable Indian manufacturers or suppliers.
How do I compare the qualified Nitronic 60 / Alloy 218 Coil / Strip manufacturers in India?
Compare actual capability for the named grade and form, applicable standard, traceability, test documentation, delivery record, inspection readiness and commercial transparency—not only the lowest quoted price.
Can you quote Nitronic 60 / Alloy 218 Coil / Strip price in India?
Yes, after grade, standard, dimensions, quantity, packing and delivery basis are defined. We do not publish a fabricated fixed price for specification-sensitive metal products.
What documents should be requested for Nitronic 60 / Alloy 218 Coil / Strip?
Depending on the requirement, buyers may request MTC / heat traceability, inspection records, PMI or chemistry verification, mechanical tests, NDT and packing / export documents.